Renaissance Linear 50

Renaissance Linear 50

The Linear 50 is not designed to be used as a heat source but incorporates a heat redistribution system (HRS) to help beat the chill. You can choose to heat the room with the fireplace or draw the heat away to another location.

Share on:

Outside Dimensions 70 3/8″W x 66 3/8″H x 28 3/4″D
Shipping weight 1,131 lbs
Shipping Crate Size 70 1/4″W x 69 1/2″H x 32 1/2″D
Door Opening Size 50 7/16″W x 19 7/8″H
Glass viewing size 45 7/8″W x 15 3/8″H
Firebox Size 44 1/2″W x 14″D
Emissions The Linear 50 can be sold in Canada and the USA since it is not regulated as per the rule definition of “fireplace” under Subpart AAA of the 2015 EPA Standards of Performance for New Residential Wood Heaters Vol. 80, No. 50.
Chimney Size 10″ RIS
Minimum Chimney Height 12’ (more with elbows)
Touch-up Paint Stove Bright Metallic Black
Maximum Fuel Load 4-5 medium logs
Maximum Log Length
24” maximum

It is possible to overfire the Renaissance Linear 50 if the maximum fuel load or log length is exceeded.

Gas Log Provision

These fireplaces have an access panel to accept an aftermarket gas log assembly. You may not install a gas lighter in any Renaissance fireplace because the high firebox temperatures will burn out the log lighter very quickly.

HRS (Heat Recovery System) Included with fireplace,
Two 10″ dia. outlet ducts – 5′ length
Two 10″ dia. inlet ducts – 5′ length
HRS Grills Four 13 1/2″ x 6″ wall grills (included)
Mobile Home Approved NO
Outside Air
4″, meets R2000 (FO-INT)

All Renaissance FireplacesTM come equipped to accept a 4″ outside air duct, if there us more than 20′ of lenght a 5″ duct can also be used.

HRS extensions EO-DUCT = 5’ outlet extension
EO-CID = 5’ inlet extension